 |
Sticker Installation Instructions
How to properly apply a vinyl transfer sticker..
1. Clean and dry the surface to which you plan on placing the sticker. Make sure all moisture is removed.
2. Peel off the top layer of paper covering with the sticker. The vinyl sticker should remain attached to the top layer of paper, leaving a blank backing strip to throw away.
3. Ensure your sticker is level, and in the location you want, and apply it like you would a normal sticker. Place it fully, vinyl side down, onto that clean smooth surface.
4. Seal the sticker, rubbing it hard with your thumb or the back of a spoon or the edge of a credit card to ensure it is properly stuck to the surface.
5. Grab the corner of the paper top layer and carefully peel it away from the sticker. This should be fairly easy. If any of the vinyl comes up with the backing, flatten the entire sticker out against the surface again, press firmly along the vinyl, then try again.
6. Spread the word about Rezmoto to all your friends and family!
<< back |
